-After lunch break, Mr. Ali Hassan again asked for my help, to photocopy the finished stamp strata titles because he needed them to be put inside a file for company's records.
Tuesday, June 22, 2010
15 June 2010 (Tuesday)
-Help the Assistant Manager of Business Developement, Mr. Anthony Dumpangol on the SPA document of Lok Kawi Heights, Seri Maya Apartment. He wanted a photocopy of the SPA's front page and schedules. There were 9 house units all together.
-After lunch break, Mr. Ali Hassan again asked for my help, to photocopy the finished stamp strata titles because he needed them to be put inside a file for company's records.
-After lunch break, Mr. Ali Hassan again asked for my help, to photocopy the finished stamp strata titles because he needed them to be put inside a file for company's records.
Monday, June 21, 2010
14 June 2010 (Monday)
- Mr.Ali Hassan ( Land Admin Executive ) came and asked me to help with the land title deeds. These Strata Title need to be stamped each with proper measurement and name stamps. There was over a hundred Strata titles and this took my day at the office.
- Mr.Ali Hassan also briefed us with some knowledge on the strata title. He said that these titles came from the Land and Survey Department and has to be given to us (Land owner) to be certified, before passing it to the respective owner.
- Mr.Ali Hassan also briefed us with some knowledge on the strata title. He said that these titles came from the Land and Survey Department and has to be given to us (Land owner) to be certified, before passing it to the respective owner.
11 June 2010 (Friday)
- We went to Pan Sheng Development Project for a site visit. This is a 2 storey terrace house project. It is located near Kingfisher Park. This site visit was conducted by Mr. Fabian.
The first section we went to is the section where they are doing the concreting for ground slab.
-Those pipes coming out from the ground are the M&E pipes. As in the picture, the bigger diameter pipes is for the toilet bowl.
-Those starter bars coming out from the ground beam will be the re-bar for apron slabs (short bar) and for slabs (long bar).
-Bunch of formwork for different size and shapes of footing were placed at one corner of the site.
-This section where they are doing the first floor column. A number of column has finished.
-Workers pouring concrete into the formwork using a pale. For a small size column, this method is a satisfactory.
-to safeguard the piling base, usually the contractor will pinned a 4 points offset wooden sticks.
-Then using the footing grid line box to navigate and mark the piling points later on. Different size and shape, depends on the design.
-This project use bakau for piling, instead of the RC piles. Emphasize by the government as an eco-friendly approach.
-This piling sleeves made specially for bakau only. It helps to joint bakau pile.
-Piling machine for small diameter pile (6-12 inch diameter pile)
-Using manual method to bend steel bar into links, for RC.
-Excavator and backhoe, can be found in most all construction site.
10hb June 2010 (Thursday)
-Went to Seri Kayangan Apartment, in LKH to inspect defects on the unit Houses, that were affected by the rain that had been going on almost every evening here in K.K. This was a joint inspection, with Mr. Alex from City Top Sdn. Bhd. They are the specialist in Roofing. Basically this inspection not just to inspect,determine the cause of the leaking, but also to determine the cost and duration for the repairing.
-It was found that the total cost will be around RM400 (Inlcluding inspection fees).
-we can see there was a leak from the roof, seep through the plaster ceiling.
-Improper gutter installation was one of the main cause for the leak problems.
-After the lunch break, we then head over to another unit at Seri Maya block Apartment. The purchaser of unit G-5-1 ha just signed for SPA. Hence inspection on the unit must be done to determine the defects.
-Most of the tiles are either not matching in colour, cracked, uneven level & etc. Therefore, we will request for replacement for all the tiles.
-Another defect here is water seep through the wall from the hair crack due to inperfect installation of window's frame.
-It was found that the total cost will be around RM400 (Inlcluding inspection fees).
-we can see there was a leak from the roof, seep through the plaster ceiling.
-Improper gutter installation was one of the main cause for the leak problems.
-After the lunch break, we then head over to another unit at Seri Maya block Apartment. The purchaser of unit G-5-1 ha just signed for SPA. Hence inspection on the unit must be done to determine the defects.
-Most of the tiles are either not matching in colour, cracked, uneven level & etc. Therefore, we will request for replacement for all the tiles.
-Another defect here is water seep through the wall from the hair crack due to inperfect installation of window's frame.
9hb June 2010 (Wednesday)
- Previously I've done the structural check design for the ground slab. Today, I will continue with the ground beam. Some parts of the steps can be analized by using ATS software. With the help of Mrs.Ima, we managed to get the Shear and Bending envelope using ATS.
- Did the example display of t he Aluminium, Roller Shutter & Glazing work sample for Darvel Bay project.
- Did the example display of t he Aluminium, Roller Shutter & Glazing work sample for Darvel Bay project.
8hb June 2010 (Tuesday)
-We went to Kingfisher Cove construction site.
-Met with the Construction Project Manager, Mr. Liew. He told us on the authority he has towards the success of the project.
-Picutre shows ground to 1st floor column has finished.
-The arrow shows the conduit system for the M&E, buried down the slab.
-Those rebars "Dowell Rebars" point by the red arrow is somehow much longer than the other rebars. This rebars will be used for stairs construction for better strength.
-Those bricks were arranged using interlocking basic for porper bonding and strength.
-Picture shows the formwork for pre-casting the lintel beam has already been eloborated on previous entry.
-Service Hole : crucial part for maintaining optimum efficiency for drainage.
-Manhole
-Bar bending machine
-Concrete spilled along the column. This usually occur due to defect/unproper formwork for the beam above.
-In the evening, we went to LKH for handing over key to the purchaser officially. We came there early, just to check on the unit. It was found that there was a problem with the window, in the master bedroom. We managed to called the maintenance to fix the problem.
-workers repairing the window.
-Filling the handing over form.
-Met with the Construction Project Manager, Mr. Liew. He told us on the authority he has towards the success of the project.
-Picutre shows ground to 1st floor column has finished.
-The arrow shows the conduit system for the M&E, buried down the slab.
-Those rebars "Dowell Rebars" point by the red arrow is somehow much longer than the other rebars. This rebars will be used for stairs construction for better strength.
-Those bricks were arranged using interlocking basic for porper bonding and strength.
-Picture shows the formwork for pre-casting the lintel beam has already been eloborated on previous entry.
-Service Hole : crucial part for maintaining optimum efficiency for drainage.
-Manhole
-Bar bending machine
-Concrete spilled along the column. This usually occur due to defect/unproper formwork for the beam above.
-In the evening, we went to LKH for handing over key to the purchaser officially. We came there early, just to check on the unit. It was found that there was a problem with the window, in the master bedroom. We managed to called the maintenance to fix the problem.
-workers repairing the window.
-Filling the handing over form.
7hb June 2010 (monday)
-Starting from today onwards, I will do some structural design check. I will use my basic knowledge on RC and Steel Design subjects to do this task. Old manual calculation from previous project done by SUDC was shown to us.
-The project that suits with our level was then selected. After a short briefing by Mrs.Ima, we start doing the calculation design check.
-For the first task, our project was the "proposed Light Industrial Building at Sandakan SEDCO Light Industrial Estate Phase II, Mile 3, North Road Sandakan. Below are some examples of the calculation steps:
-The project that suits with our level was then selected. After a short briefing by Mrs.Ima, we start doing the calculation design check.
-For the first task, our project was the "proposed Light Industrial Building at Sandakan SEDCO Light Industrial Estate Phase II, Mile 3, North Road Sandakan. Below are some examples of the calculation steps:
Subscribe to:
Posts (Atom)
